sofa recliner mechanism - HX-4153

sofa swivel mechanism

PACKAGE MATERIALWOOD
MERS1.14×0.96×0.47M
QTY18SETS/CTN
G.W400KG

Raw and processed material: steel plate, thickness: 3-5mm, high quality material from Baosan and Bengxi
Paint: no contamination-no plumbum, no chromium
Number of open and fold: more than 5,000
Packing: carton or wood

1. The ottoman adopts the design of wide heavy gauge links and built-in
articulating elevated mid-ottoman. Profile shape designed for safety
and appearance without pinch points. Articulating designs allows use
of wider&higher mid-ottoman for elimination of entrapment areas and
for leg support.
2. The system adopts the geometrically balanced design to balance chair
operation. It is consistent and easy for operation by any person. The
occupant is weight is used to balance operation.Meanwhile it controls
the sitting position and reclining position.Springs here are only used
for locking and the initial start of the opening.
3. The customer has several options as to how to activate the mechanism.
There are cable styles, outside handle style and inside handle style.
Easy operation. Customer can choose to use handle or lever activation
to open the mechanism and the color of the handle or lever. Slight
footrest pressure will allow closing the ottoman.
4. The system uses direct drive with double locks. The direct drive with
double over-center locks enables maximum synchronization of side positive
locking of both sides. Square drive tube connects to and controls both
left and right sides. Ottoman is locked closed on both sides.
5. Four point system of stabilizer tube are adopted. The double pair of glide
stabilizer makes exceptional side to side stability Stabilizer tube on
each glide link and on the extreme end of the mechanism.
6. Four point blocking system. All four glide links blocked while the ottoman
is open to eliminate unwanted motion while reclining and to eliminate
rearward tipping problems.
7. The system uses ball bearing glide joints. Greased full race ball bearing
glide joints enables the mechanism runs more smoothly and less friction
and longer lift.
8. The system uses the extended life rivet joints design.All rivet joints have
either acetal or bronze rivet bushing and acetal spacers to eliminate any
steel to steel contact. No metal to metal noises when links contact nylon
stop pins.
9. Interchangeable on wood frame design.The wood frames designed for the
rocker recliner, motorized lift are all interchangeable.
10. The back of the chair adopts the KD sleeve design for easy packaging
and installation.