35mm height 3/4 extension ball bearing slides - BS3501-2

Specifications:
1.Profile:Side space - 10 mm (0.39");Height - 35 mm
2.Extension:single extension
3.Load capacity(Load Rating): 30kgs(66 LBS)
4.Size: 250,300,350,400,450,500,550,600mm
5.Material: Galvanized steel / Work hardened cold rolled steel
6.Finish: GA. / Clear Zinc-plated(ZP), Yellow Zinc-plated(YZP)
7.Thickness:1.2mm*1.2mm

Application:
part extension for 35mm wooden drawers
For bedroom, bathroom, dining room and kitchen cabinets.
Medium duty commercial and residential desk / credenza drawer, Various institutional and contract applications where light duty full extension is required.

Features:
1.Simple bottom mounting tabs. Postive stop.
2.Lateral play is eliminated when the groove mounting method is employed.
3.Non-handed , 32mm hole system. Silent movement. and space - saving.
4.Lever disconnect for easy drawer removal
5.Hold-in detent
6.With end slipcover.


Description:
1.Precision partial exentsion with pull out stop and roll out prevention
2.Slide and ball race form a single inseparable unit
3.Smooth action and high side stability through precision slide
5.For wooden drawers with grooved,rebated or loosely fitted bases

Made from galvanized clear zinc plated steel the runners are guided by two ball cages (linear ball bearings), they have a carrying capacity of 30kg (66 lbs), and are suitable for either side mounting (non-handed) or fitting into a 35mm wide x10mm deep grooved drawer side.

Sold in pairs.