Remote control tv lift for 42inch tv in tv stands - OK618

Remote control tv lift for tv stands

1.You need to decide what stroke length and force actuator you need. The stroke length is the length the actuator moves through.

So as an example a 12" Stroke actuator will move 12", but note that the length of the actuator when retracted will be about 8" longer than the stroke. So a 12" stroke actuator is about 20" in total

2.You will need some type of TV mounting wall bracket if your lifting a Plasma or LCD TV to mount the TV to.

You can typically buy these of the internet for around $100 - $200 each

3. You will need to buy 2 of our mounting brackets to attach the actuator to, and then attach the brackets as show in the diagram above to the back of your TV mounting bracket.

For this you will have to do some drilling and use screws and nuts to attach them together.

4.Linear Guide rails will be needed to give the mechanism a smooth straight lift. Linear guide rails are used as draw guides

and provide smooth linear motion. Make sure you buy heavy duty types, used for industrial draws. Most hardware stores sell these for around $30 per pair,

and make sure the stroke is equivalent or longer than the Actuator stroke that you have chosen.

5.You will need a remote control system that can be purchased from our Actuator Accessories section, or a manual rocker switch, also available from our Accessories section.

1. Synchronous machine with electro-magnetic brake, 60W 180V~240V 50HZ or 110V 60HZ
2. Lifting up & down in a close way
3. Loading capacity: 75KG
4. Material: High quality steel, modern design and excelent quality.
5. Traveling with double orbits,moving smoothly and quietly
6. Control Methods Manual control & Wireless Remote Control RF; able to penetrate wood to receive the signal within radius 20m
7. Suitable for plasma TV from 22 to 60inch
8. Travel Length: 400/450/500/600/700/750/800mm